|
Wire feeder optimizes uptime |
|
|
|
|
 The HyperFeed II wire feeder/interface from Motoman is designed to help manufacturers robotically weld more parts per hour by optimizing application uptime and throughput.
The HyperFeed II system starts and ends welds faster and interfaces
more efficiently with a variety of semi-automatic power sources. It can
be interfaced with all Motoman robots that use NX100, XRC, MRC and ERC
robot controllers, so manufacturers with new Motoman robots and welding
equipment and legacy models can all benefit from this advanced
technology. The HyperFeed II wire feeder is equipped with four geared
feed rolls and is rated at 500 amps at 100% duty cycle with a maximum
speed of 750 ipm. The feeder is equipped with a low-inertia drive
system, smaller diameter drive rolls, and a high-performance motor
control. It is equipped with 0.025 in./0.045 in. feed rolls as
standard. The unit has an LED wire feed speed display and outputs for
an optional air blast and wire brake solenoid.
motoman.com
|
