|
Turning centers designed for high production |
|
|
|
|
 The new Doosan PUMA TL-series turning centers from Doosan Infracore feature upper and lower turrets, and a programmable tailstock for high production machining.
With two turrets cutting simultaneously, cycle times can be
significantly reduced. Work capacity is 9.4 in. dia. x 23.6 in. long on
the model TL2000, and 39.3 in. long on the TL2500. Bar capacities are 2
5/8 in. on the TL2000 and 3 in. on the TL2500L. Both models are
designed for heavy and interrupted cutting, high accuracy, and superior
surface finishes. The two turrets house a total of 20 (12 upper plus 8
lower) tools. Their quick-response servo drives reduce
station-to-station times to 0.2 seconds. This quick indexing time,
combined with a 945 ipm Z-axis rapid traverse, shave additional seconds
from cycle times. The spindle is driven by either a 30 hp or 35 hp
integral motor, generating speeds of 5,000 rpm or 3,500 rpm
respectively.
ferrotechnique.com
|
